Car Head Up Display HUD OBD2 LCD Mirror Speedometer Speed Temp Alarm RPM Tester

Attention:
The OBD2 mode are not compatible with following cars:
– European and American cars manufactured before 2008 and Asian cars manufactured before 2008.
– American cars produced before 2008 and all Dodge, JEEP, Sail, Chrysler cars.
– France cars manufactured by FAT,DS,PEUGEOT,Citroen,Renault,Simka, Amirka
–
Japanese cars: Suzuki,  Mazda, Infiniti (QX50, Q50, Q501), Toyota
avanza 2013, Lexus (is250,  ex250, ES300H), Honda (jazz, CRV) are not
compatible. And all Japanese  cars before 2008 are not compatiable.
– Some models of Kia and Hyundai cannot use this OBD2 HUD (2013 Hyundai Sonata, 2017 Kia Soul PS, etc.)
– Oil-electric hybrid and some diesel vehicles cannot use OBD2 HUD, GPS HUD are recommended.
– Pickup Trucks and Modified ECU vehicles are not suitable for this HUD.

If you are not sure this product is suitable for your car or not, please contact us before ordering, thank you!

1. Available for cars with OBD2 and EUOBD port(Car automatic diagnosis system) ,plug and play
2. TFT LCD multi color smart display
3. The first scan will show the vehicle protocol
4. The language can be changed
5. Multi function display mode or simple function display mode can be switched freely
6. Add new functions: accelerating competitive mode ,Brake performance test, can read the entire car data stream information
7. Supported protocol: ISO15765 CAN Bus, ISO14230 KWP2000, ISO 9141-2
8.  Rich
   Contents:vehicle speed,engine RPM,water
   temperature,voltage,instantaneous fuel consumption,average fuel
   consumption,driving distance measurement,driving time ,low voltage
   alarm,high water temperature alarm,over speed alarm, engine fault code
   alarm, eliminate the fault code,freely switch between
   kilometers&miles.

OBD smart digital device installation :

1. Know
   your vehicle brand,the OBD smart digital device work for cars with
   OBDII agreement or EU OBD agreement. Open the engine hood and find the
   sticker below it , if it has words like OBDII CERTIFIED, then it can be
   installed.
2. Find out the 16 pin diagnostic link  of the vehicle and connect it well with OBDII connecting line.

Technical Parameters:

• Environment temperature: -40c- + 80c
• atmospheric pressure 86-106KPa
• Relative Humidity: 10% -95%
• environmental noise <= 60dB (A)
• Alarm sound level: ¡·=30dB (A)
• Working voltage: 9V ~ 16Vdc (12Vdc / 400mA)
• Product size: 73*68*46cm/approx.28.74*26.77*18.11 inch
  
• Product Weight: 50 g
• Cable:180cm  

Package included:

• 1 x P10 Head Up Display
• 1 x OBD cable
• 1 x Anti-Slip Mat
• 1 x English User Manual